Divers : Industriel d’occasion à vendre

Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir

Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8

LTL

To Fit Cribmaster Weighstation

Cummins C8.3 6 Cylinder 8.3 L Diesel Engine, 1997 US EPA Label, Eaton Fuller Manual Transmission, 12000 lb Front Axle, 20000 lb Rears, 32000 lb GVWR, 11R22.5, Air Ride Suspension, 150 in Wheelbase, (1) Ditch Witch Mixing System, (1) 1000 gal Tank, 11 ft x 92 in Bed, Pintle Hitch, Gasoline Engine

Efco forms. Flat (parapet) Sections - Qty of 20. Curved sections (Barrier) - Qty 10. Top Form Extensions - Qty 10. Associated Hardware and Accessories Included. all form are 10 Ft long.

Liquid Seperator, Heat Exchanger, Service Liquid Valve, Temperature Regulating Valve

230 V, 3 Phase, 60 Hz

w/ Hotsy Model 1260SS, 3000PSI

2.1 kW 3 Phase Motor

Kitchenette, (1) Bathroom w/ Shower, (2) Bedrooms

Centrifugal Evac Pump:
2021
50/60 HZ
380/440 V

Motor:
50/60 HZ
240 Volts
850 RPM
36.5 AMPS
10 HP

Baldor 1 hp 3 Phase Motor, extensions

Each Durst drive w/ (1) Rexroth model: R902108017/02 AA11VL0260LRDDH211L hyd pump (60 GPM) Each w/ (1) Rexroth model: AA11VL0130DRG/10L NSD62N00-ES hyd pump (60 GPM) - Each w/ (1) Rexroth model: RG02120203/06 type AA11VL0260LRDH2/11L-NSD62K01 (60 GPM) - HPU 5000 PSI WP each drive 180+ GPM per drive - Complete w/ all low pressure suction piping; w/ Parker high pressure; (7) high pressure filter system (4 per drive) - HPU is all installed in 20 FT. container w/ dual side doors; end doors; w/ forklift slots - Unit is insulated - Container has certified shipping plate - HPU was originally powered by (2) Detroit 14LTR series 60 engines; has dual drive line guards - (2) hydraulic cylinders: 12" rod x 46 FT. OAL 10" rod x 46 FT. OAL; both 5K PSI WP

To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase

2) 7/8 In to 5-1/2 In buggy heads,( 2)10 In and (1)12 In coil, 10 spare cables, all spare parts

1 Piece 42 ft 4 in and 1 Piece 37 ft 10 in Total 80 ft 2 in

1 piece 21 ft, 1 piece 12.5 ft, Total 33 ft 6 in

2 pieces 21 ft 2 in long, Total length 42 ft 4 in w/ Coating Certs

125 PSI, Hoses

Arch clamp with hydraulically driven spacing by cylinders. - Automatic locking clamp with its own weight lifted by a lifting device via 4-strand chain slings for handling. - External indicators for validation of the different phases. - Supply voltage: 24 VDC - Hydraulic pressure: 150 bar - Handling: 1 to 4 segments, CE Marked

Arch clamp with hydraulically driven spacing by cylinders. - Automatic locking clamp with its own weight lifted by a lifting device via 4-strand chain slings for handling. - External indicators for validation of the different phases. - Supply voltage: 24 VDC - Handling: 1 to 2 segments, CE Marked

Hydraulically driven spreader clamp with hydraulic cylinders. - Self-locking clamp with its own weight lifted by a lifting device via - 4-strand chain slings for handling. - External indicators for validation of the different phases. - Mechanical locking system. - Equipped with a 3200kg hook in the center - Handling: 1 to 3 segments, CE Marked

3 Phase Motor

To Fit Hommak M-HM30 Homogenizer, 3 Phase Motor, Canner, Homogenizer, Refrigerated Tank w/ Agitator, Food Processing Grinder, Steam Boiler, Chiller, Steam Recovery Tower, Blender, Yogurt Filling Machine, Sullair Air Compressor

To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors

60 (9ft) 4 (21ft) 6 (23ft)